Potter PS40-1 PS40 Series Supervisory Pressure Switch for Dry Valves with One Set SPDT Contacts
Potter PS40-1 PS40 Series Supervisory Pressure Switch for Dry Valves with One Set SPDT Contacts
Potter PS40-1 PS40 Series Supervisory Pressure Switch for Dry Valves with One Set SPDT Contacts
PS40-1 | PL-PS401
Veuillez vous connecter pour voir les tarifs, consulter la disponibilité des produits et ajouter des articles à votre panier.
Aperçu
PS40-1Pressure Switch with one set SPDT contacts, P/N1340403
The Potter PS40 Series Supervisory Pressure Actuated Switches are designed primarily to detect an increase and/or decrease from normal system pressure in automatic fire sprinkler systems. Typical applications are: Dry pipe systems, pre-action air/nitrogen supervision, pressure tanks, air supplies, and water supplies. The PS40 switch is factory set for 40 PSI (2,8 BAR) normal system pressure. The switch marked with the word LOW is set to operate at a pressure decrease of 10 PSI (,7 BAR) at 30 PSI (2,1 BAR). The switch marked with the word HIGH is set to operate at a pressure increase of 10 PSI (,7 BAR) at 50 PSI (3,5 BAR).
- One or two switch models are available
- Independent switch adjustment on two switch models, no tools needed
- Two 1/2” conduit/cable entrances • Separate isolated wiring chambers
- Non-corrosive pressure connection
- Non-Conductive Enclosure
- Vds version available
Principales caractéristiques
Renseignements généraux
Spécifications
ADI Numéro du produit PL-PS401 Code fabricant PS-401 Fabricant Potter Electric Signal, LLC Marque Potter Electric Signal, LLC Modèle de produit PS40-1 Nom de produit PS40-1 Pressure Switch Série de produit PS40 Type de produit Pressure Switch
Application/Utilisation Air Flow, Dry Pipe Sprinkler System, Entrance, Fire Suppression System, Outdoor, Pressure Tank, Watering Latence CAS (Column Address Strobe) Die-cast, Nylon
Hauteur 4.2" Largeur 3.8" Profondeur 3.2"
Type d'installation Commercial
Contenu de l'emballage - PS40-1 Pressure Switch
- 1 x SPDT Contacts