Product Overview
The 120T/4473 requires that a 3/4" hole be drilled for the switch and 3/8" hole for the magnet. The 3/4" switch mounting is desirable since the extra wire and connections can be more easily inserted into the larger hole for concealment. Also, should the need arise for testing or replacement, it would be easy to pull the switch, extend the extra wire and access the original connections.
Installation is further enhanced by using a smaller 3/8" diameter magnet to avoid the need to center a larger hole in a 1" to 1 1/2" thick door or window. This will allow you to offset the magnet should it be required.
The 120T/4473 switch set was developed for and should only be used in openings with wooden or aluminum frames.
General Information
Name : GRI 120T-12WG 120T Series 3/4" Switch 3/8" Magnet Recessed Switch Set, Wide Gap, 10W, 200VDC, 0.40A, Closed, N/O, A, White , George Risk Industries
Category : Magnetic Contacts
UPC Code : 697625003990
Country of Origin : United States. Country of origin is subject to change.
Specifications
General Information
ADI Part Number : GI-120T12WGW
Brand Name : GRI
Manufacturer : George Risk Industries
Manufacturer Part Number : 120T-12WG-W
Product Model : 120T-12WG-W
Product Name : 120T-12WG-W Magnetic Contact
Product Series : 120T
Product Type : Magnetic Contact
Technical Information
Contact Configuration : N.O.
Contact Form : Form A
Contact Resistance : 150000 Micro Ohm
Contact Resistance (Ohm) : 0.15
Mounting Type : Recessed Mount
Recommended Use : Door, Window
Standard Gap : 0.75"
Standard Gap (mm) : 19.05
Physical Characteristics
Application/Usage : Aluminum, Wood
Color : White
Diameter (mm) : 9.525
Product Information
Contact Type : Closed Loop
Diameter : 0.38" (9.53 mm)
Installation Type : Hybrid
Warranty
Limited Warranty : Lifetime
Miscellaneous
Additional Information : <ul> <li>Press To Fit</li> <li>Also Available in Stubby Version</li> <li>Hermetically Sealed</li> <li>Plated Contacts Resist Sticking or Freezing</li> </ul>
Certifications & Standards : <ul> <li>UL</li> <li>ULC</li> </ul> <p></p>
Features : End of Line (EOL) Resistor
