Easy to See and Operate

Ideal for use in office buildings, institutions, hospitals, nursing homes, banks, etc. where codes require a readily apparent and easy to use door control or electric lock release and an architecturally coordinated, aesthetically pleasing, appearance is required.

Standard 5286 exit release switches feature a large, easily operated, 1-1/2" x 3" push plate. The push plate is available in two sizes and three different back mounting plates to meet all installation requirements. Both the push plates and the back mounting plates have smooth beveled edges on all four sides to enhance appearance. These assemblies are joined from the back with concealed screws to resist tampering.

"N" Series Push Plates

Typically used for mounting on narrow door frames and aluminum mullions, the "N" style devices consist of the standard 1-1/2" x 3" push plate mated with a narrow 1-3/4" wide back plate for hollow metal or aluminum frame mounting. Furnished with slotted oval head stainless steel screws for direct mounting to frame or partition box within frame.

Standard Wall Plate Size

The "W" Series push plate consists of a 1-1/2" x 3" push plate with a 3" wide back plate for standard single gang box mounting. Furnished with standard slotted head screws.Pin-in-hex tamper resistant mounting screws are available on special order.

2 Gang Push Plate Switches

The "D" Series has a large 4" x 4" push plate with a 4-5/8" wide back plate prepared for mounting to a double gang box. Furnished with pre-assembled socket head mounting screws easily accessible through small holes in the push plate.

Variety of Contact Forms

Push plates switches are available with alternate action, momentary or time delayed contacts. The adjustable delay action assemblies utilize a miniature pneumatic timer, adjustable from 2 to 60 seconds, with a compression spring under the push plate.

All switch assemblies are rated for heavy duty usage and are furnished with colorcoded wire leads for easy hook-up.