Product Overview
The MIC2S module has an electronically-balanced input with screw terminal connector. It has an interface with low-impedance dynamic microphones. It also has an interface with electret condenser microphones and an internal 24V DC phantom power supply to provide the bias supply that is enabled by a PCB jumper. The module has a gain control that will allow the gain to be adjusted from 18 dB to 62 dB and the ability to mute lower priority modules and be muted by higher priority modules. The module is able to assume any of 4 priority levels. The module has a VOX/gating circuit to control muting of lower priority modules and its internal gating circuit with a threshold control. It has a built-in limiter, with a threshold control, to limit the maximum output level of the module. The module has bass and treble controls with cut only of 10 dB at 100 Hz and 3 kHz, respectively. The module also has a voice enhancement control for improving voice intelligibility. The module’s output is assignable to either or both of two mixing buses.
General Information
Name : Bogen MIC2S Microphone Input Module (Replaces MIC1S) , Bogen
Category : Pro Volume Controllers
UPC Code : 765368391190
Country of Origin : Taiwan, Province of China. Country of origin is subject to change.
Specifications
General Information
ADI Part Number : BO-MIC2S
Brand Name : Bogen
Manufacturer : Bogen Communications International, Inc
Manufacturer Part Number : MIC2S
Product Model : MIC2S
Product Name : MIC2S Microphone Input Module
Product Series : MIC
Product Type : Microphone Input Module
Weight (Approximate) (g) : 62.369
Physical Characteristics
Depth : 3.50" (88.90 mm)
Depth (mm) : 88.9
Height : 3.1"
Height (mm) : 79.375
Weight (Approximate) : 62.4 g
Width : 1.38" (34.92 mm)
Width (mm) : 34.925
Warranty
Limited Warranty : 3 year
Miscellaneous
Additional Information : <ul><li>Gain/Trim control</li><li>Hi-cut/Lo-cut controls</li><li>Voice enhancement control</li><li>Noise gate with threshold control</li><li>Limiter with threshold control</li><li>24V phantom power</li><li>Screw terminals: XLR connector</li></ul>
