Aperçu
Altronix ACMS8CB is UL listed sub-assemblies designed to be used in Altronix wall and rack mount enclosures. Input power to ACMS8CB is to be derived from eFlow series power supplies. Dual input design allows power to be steered from two (2) independent low voltage 5 to 24 VDC power sources into eight (8) independently controlled PTC protected outputs. Outputs are activated by an open collector sink, normally open (NO), normally closed (NC) dry trigger input, or wet input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACMS8CB will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs. The spade connectors allow you to daisy chain power to multiple ACMS8CB module. This feature allows you to distribute the power over more outputs for larger systems.
Renseignements généraux
Nom : Altronix ACMS8CB Dual-Input Access Power Controller, PTC Protected Outputs, Board , Altronix
Catégorie : Panneaux de commande - Panneau
UPC Code : 782239956425
Country of Origin : United States. Country of origin is subject to change.
Spécifications
Caractéristiques générales
ADI Numéro du produit : AX-ACMS8CB
Code fabricant : ACMS8CB
Fabricant : Altronix Corporation
Marque : Altronix
Nom de produit : Dual Input Access Power Controller 8 PTC Protected Outputs Board
Poids (approximatif) (g) : 317.515
Série de produit : ACM
Type de produit : Dual Input Access Power Controller Board
General Information
NDAA Compliant : Yes
Caractéristiques techniques
Compatible avec : Access control Device, Electric Strike, Magnetic Door Holder, Magnetic Lock, Rack Mount Enclosure, Wall Mount Enclosure
Caractéristiques physiques
Application/Utilisation : Access Control
Facteur de forme : Board
Hauteur : 1.25" (31.75 mm)
Hauteur (mm) : 31.75
Largeur : 4.13" (104.78 mm)
Largeur (mm) : 104.775
Poids (approximatif) : 317.5 g
Garantie
Garantie Limitée : Lifetime
Informations produit
Longueur : 7.7"
Longueur (mm) : 194.31
Divers
Caractéristiques : LED Indicator
Certification environnementale : ROHS
Contenu de l'emballage : <ul> <li>Dual Input Access Power Controller 8 PTC Protected Outputs Board</li> <li>Mounting Hardware</li> </ul>
Respectueux de l'environnement : Yes