Aperçu
The MP Series is a standard THERMOFLEX® single circuit, Normally Open contacts detectors, in which the connectivity is modified with pigtail leads that extend through a seal plate.This provides for enhanced protection against corrosive or moisture-laden environments.
This detector is suitable for use in areas where condensation or corrosion can have harmful effects on circuit wiring connected to standard terminals. Its seal plate (with extended pigtail leads) will mount onto a typical cast exterior back box.The detector is connected to a fire alarm system’s input circuit as an initiating device.
The internal contacts are normally open, and will close when the detector operateseither on a rate of temperature increase, or if the releasing temperature is reached. It is often installed with an addressing module if it is to be annunciated as a specific room or space, e.g. electrical room, garbage compactor, etc. With its non-metallic diaphragm, the detector can operate normally at low temperatures, making it suitable for non-heated or chilled environments including garages and carports.
Renseignements généraux
Nom : Potter CR-135MP THERMOFLEX CR-MP Series Indoor Outdoor Dual Action Heat Detector, 135°F, Weatherproof , Potter Electric Signal, LLC
Catégorie : Détecteurs de chaleur
UPC Code : 999999378689
Country of Origin : Canada. Country of origin is subject to change.
Spécifications
Caractéristiques générales
ADI Numéro du produit : PL-CR135MP
Code fabricant : CR135MP
Fabricant : Potter Electric Signal, LLC
Gamme : THERMOFLEX
Marque : Potter
Modèle de produit : CR-135-MP
Nom de produit : THERMOFLEX CR-135-MP Fixed Temperature Heat Detector
Poids (approximatif) (g) : 453.592
Série de produit : MP
Type de produit : Fixed Temperature Heat Detector
Caractéristiques techniques
Technologie batterie : Wired
Caractéristiques de l'alimentation
Tension d'entrée : 120V AC, 28V DC
Tension d'entrée (V AC) : 120
Tension d'entrée (V DC) : 28
Caractéristiques physiques
Couleur : White
Facteur de forme : Ceiling Mount
Hauteur : 2" (50.80 mm)
Hauteur (mm) : 50.8
Poids (approximatif) : 453.6 g
Profondeur : 4.37" (111 mm)
Profondeur (mm) : 111
Category Specific Attributes
Heat Detector Type : Rate of Rise
