Our emergency nurse call systems enable easy communication between residents and their caregivers. To place a call, residents push the button and a red LED light lets the resident know the call has been placed and help is on the way. Once activated, associated corridor lights flash, indicating which room requires assistance. Residents or caregivers may twist the button to turn off or cancel the call. Our emergency stations are ideal for assisted living centers, nursing homes and senior care communities.

E-108A Emergency stations are designed for situations where the call for assistance must remain activated. This station features a single-gang stainless steel face plate with silk-screened designations. The E-108A has a “Mushroom” push-button with mechanical latching. Push on/twist off. They may be flush mounted on standard outlet boxes with single-gang rings, or surface mounted on Wire mold 5748 or equal with a depth requirement of 1 ¾”. The activator is oil tight. Momentary switching is available.

Operation:

Pushing the button on the E-108A activates a call for help confirmed by a red LED. To cancel the call requires the twist of the push-button to the right.

Mounting:

The satin finish stainless steel face plate with silk-screened designations may be flush mounted on a standard outlet box with single-gang plaster ring, or surface mounted on a Wire mold 5748 or equivalent.

Engineering Specifications:

The contractor shall furnish and install the CORNELL E-108A Emergency Station as indicated on the plans. Face plate shall be brushed stainless steel, with epoxy silk-screened designations. “Mushroom” button shall be minimum of 1½” in diameter. Call indicator shall be a red light emitting diode. The Emergency Station shall fit on a standard single gang plaster ring or Wire mold 5748 (for surface mounting) or equal. Minimum depth shall be 1 ¾”.

Technical Information:

• Power Requirements: 24VDC
• Operating Environment: 50-120°F Indoor Non-condensing
• Physical Faceplate Dimensions: 4 ½ ”H x 2 ¾ ”W (1 Gang)
• Mounting: Single-Gang back box with 1¾” minimum depth
• Wiring: #22 AWG Minimum