GRI 130T-12-W 120T Series 3/4" Switch 3/8" Magnet Recessed Switch Set, Standard Gap, 5W, 175VDC, 0.25 Amp, Open, N/C, B, White
130T-12-W
|GI-130T12W
GRI 130T-12-W 120T Series 3/4" Switch 3/8" Magnet Recessed Switch Set, Standard Gap, 5W, 175VDC, 0.25 Amp, Open, N/C, B, White
130T-12-W | GI-130T12W
Veuillez vous connecter pour voir les tarifs, consulter la disponibilité des produits et ajouter des articles à votre panier.
Aperçu
The 120T/4473 requires that a 3/4" hole be drilled for the switch and 3/8" hole for the magnet. The 3/4" switch mounting is desirable since the extra wire and connections can be more easily inserted into the larger hole for concealment. Also, should the need arise for testing or replacement, it would be easy to pull the switch, extend the extra wire and access the original connections.
Installation is further enhanced by using a smaller 3/8" diameter magnet to avoid the need to center a larger hole in a 1" to 1 1/2" thick door or window. This will allow you to offset the magnet should it be required.
The 120T/4473 switch set was developed for and should only be used in openings with wooden or aluminum frames.
Principales caractéristiques
- Lifetime Warranty
- Available in closed loop, open loop and SPDT
- Wire leads or terminal blocks
- 12" leads
- Available with new rare earth Magnets
- Longer Leads, Zip Cords, or Jacketed Cable on Request
- Built-in Resistors and Diodes Available on Request
- Switches or Magnets are Available Separately
- Supervisory Loops Available
Renseignements généraux
Spécifications
ADI Numéro du produit GI-130T12W Application/utilisation Door, Indoor Code fabricant 130T-12-W Fabricant George Risk Industries Marque George Risk Industries Modèle de produit 130T-12-W Nom de produit 130T-12-W Magnetic Contact Pays d'origine US Série de produit 130 Type de produit Magnetic Contact
Ecart-type 0.50" Forme du contact Forme B Technologie de connectivité Wired
Couleur White
Alimentation DC Power Tension d'entrée 175V DC
Diamètre 0.40" Type de contact NC (Normally Closed) Type de montage Recessed Mount Type d'installation Hybrid (DIY + Professional)
Garantie Limitée Lifetime Warranty
Caractéristiques End of Line (EOL) Resistor Informations complémentaires - Press To Fit
- Also Available in Stubby Version
- Hermetically Sealed
- Plated Contacts Resist Sticking or Freezing