Bosch
Bosch D8130 Door Release Module with Form 'C' (5A rated) Contacts
D8130 | DS-D8130
Veuillez vous connecter pour voir les tarifs, consulter la disponibilité des produits et ajouter des articles à votre panier.
Aperçu
Spécifications
Documents
Aperçu
The D8130 Door Release Module is an accessory for fire alarm control panels (FACPs) that controls system functions commonly required in National Fire Prevention Association (NFPA) 72 fire alarm installations. Two independent Form C dry contacts, each rated at 5 A, connect low-voltage circuits to magnetic door holders, pilot relays, or contactor units for function control.
Typical applications are:
Supervised Disable Switch
To facilitate fire alarm installation testing, the D8130 Module contains a supervised disable switch that prevents operation of the relay contacts. An amber Disable LED indicates when the switch is in the disable position. Connect one or more D8130 modules to any unused 1 kΩ zone or point of the control panel to detect module disabling.
A trouble is indicated when the D8130 switch is in the disable position, and a restoral signal is sent when the switch is returned to the normal position. (Refer to the control panel's Program Entry Guide for details on programming a trouble signal for an open or short condition.) When the contacts are activated with the switch in the normal position, no trouble indications are sent to the control panel.
Release Contact Outputs
A normally-open (NO) terminal, a normally-closed (NC) terminal, and a common (COM) terminal are provided for each D8130 contact. In the inactive state of the contact, the NC terminal has continuity with the COM terminal. In the active state of the contact, the NO terminal has continuity with the COM terminal.
Typical applications are:
- releasing fire doors, emergency exit doors, and stairwell doors
- elevator recall
- HVAC control
Contact Activation
The control panel indicating output activates the contacts of the D8130. A red Alarm Input LED indicates contact activation.
The duration of the contact activation follows the programmed indicating circuit time. Use a jumper to set the contact activation to be instant or delayed by 14 sec when there is an alarm condition. With the delay option selected, a 14 sec delay also occurs upon restoral. This delay feature is useful for momentary bell tests.
- Two Form C (5 A rated) contacts
- Remotely controls fire system devices
- Instant or delayed relay activation and restoral
- Relay closure follows indicating circuit duration
- Disable switch supervised for system testing
Supervised Disable Switch
To facilitate fire alarm installation testing, the D8130 Module contains a supervised disable switch that prevents operation of the relay contacts. An amber Disable LED indicates when the switch is in the disable position. Connect one or more D8130 modules to any unused 1 kΩ zone or point of the control panel to detect module disabling.
A trouble is indicated when the D8130 switch is in the disable position, and a restoral signal is sent when the switch is returned to the normal position. (Refer to the control panel's Program Entry Guide for details on programming a trouble signal for an open or short condition.) When the contacts are activated with the switch in the normal position, no trouble indications are sent to the control panel.
Release Contact Outputs
A normally-open (NO) terminal, a normally-closed (NC) terminal, and a common (COM) terminal are provided for each D8130 contact. In the inactive state of the contact, the NC terminal has continuity with the COM terminal. In the active state of the contact, the NO terminal has continuity with the COM terminal.
Principales caractéristiques
Renseignements généraux
Nom:Bosch D8130 Door Release Module with Form 'C' (5A rated) Contacts
Category:Bosch, Intrusion, Alarm Control Panels & Keypads, Control Panel Modules, ADI Pro Rewards
UPC Code:782695029787
Country of Origin:China. Country of origin is subject to change.
Spécifications
ADI Numéro du produit DS-D8130 Code fabricant D8130MP Fabricant Bosch Marque Bosch Modèle de produit D8130MP Nom de produit D8130MPDoor Release Module Type de produit Module
Compatible avec Fire Alarm Control Panel
Couleur Vert Hauteur 5" Largeur 2-99" Profondeur 75"
Tension d'entrée 12V DC
Type d'installation Commercial
Caractéristiques Indicateur LED
Compabilité Series Control Panels: D9412 D7412 D7212 D9124 D191C D192G B9512G, B8512G, D9412GV4 D8412GV4 D7212GV4 D9412GV3 D8412GV3 D7212GV3 D9412GV2 D8412GV2 D7212GV2 D9412G D8412G D7212G Pays d'origine CN