The ComNet FDW1000 Series and EXP101 Series of transceivers makes it possible to install card readers farther from the access control panel by providing a long-range fiber optic connection between the door or gate readers and most manufacturers’ access control panels. The series includes both a remote (door/gate) device and a central (access control panel) device. The FDW1000 devices are compatible with the EXP101 expansion modules that allow up to seven additional readers to share the optical link created by the FDW1000/C (central) and FDW1000/R (remote) devices.

Specifications

Power

• operating voltage range = DC 8 to 12 V
• power consumption < 6 W each
• hardened power supply item number PS-AMR5-12 as needed

Data

• Wiegand (max 248 bits pass through, filter the first eight bits unless Wiegand No Filter is active)
• strobed (clock and data)
• F/2F unsupervised

LED

• DC 0 to 30 V

Relay Channels 1 and 2

• FDW1000/C and EXP101/C central units will each accept up to two dry contact closures as inputs – RELAY 1 IN and RELAY 2 IN – and pass the status of each contact to corresponding FDW1000/R and EXP101/R remote units, each containing two single-pole, double-throw relays – RELAY 1 OUT and RELAY 2 OUT.

Relay Channels 3 and 4

• FDW1000/R and EXP101/R remote unit will each accept up to two dry contact closures as inputs – RELAY 3 IN and RELAY 4 IN – and pass the status of each contact to corresponding FDW1000/C and EXP101/C central units, each containiing two single-pole, double-throw relays– RELAY 3 OUT and RELAY 4 OUT.

Relay Contact Ratings

• DC 30 V, 1.0 A, resistive loads only, 1 × 105 operations at room temperature ( 20°C or 68°F)
• AC 125 V, 0.3 A, resistive loads only, 1 × 105 operations at room temperature ( 20°C or 68°F)