adi-insite-ca
Jusqu’à 38 % surFirst Alert et Honeywell HomeÉconomisez jusqu’à 66 % durant le solde de fin d’annéeJusqu’à 38 % surFirst Alert et Honeywell HomeÉconomisez jusqu’à 66 % durant le solde de fin d’annéeJusqu’à 38 % surFirst Alert et Honeywell Home
ENDevenir ClientAdresses des magasinsAide
ADI a Resideo company
menu
Mier BW-24PM8 Pole Mount for 24" Wide Enclosure, 8-10" Pole
Acheter Mier Products

Mier BW-24PM8 Pole Mount for 24" Wide Enclosure, 8-10" Pole

BW-24PM8|BW-24PM10
Acheter Mier Products

Mier BW-24PM8 Pole Mount for 24" Wide Enclosure, 8-10" Pole

BW-24PM8|BW-24PM10

Se connecter prix revendeur

Devenir client ADI
Mier Products

Mier BW-24PM8 Pole Mount for 24" Wide Enclosure, 8-10" Pole

BW-24PM8 | BW-24PM10

Veuillez vous connecter pour voir les tarifs, consulter la disponibilité des produits et ajouter des articles à votre panier.

Aperçu
Spécifications
Documents

Aperçu

For poles that are 6" in diameter to 12", our Pole-Mount Kits use two (2) heavy-duty adjustable bands which fit inside the rails across the top and bottom of the enclosure and fit between the enclosure and the pole as pictured on the left and below.

Principales caractéristiques

  • Mark the center point of each Mounting Rails (A)
  • Slide the Adjustable Band Guides inside both Mounting Rails, and center them to the point marked on step 1 (B)
  • Place the 0.25" x 20 Screws and 0.25" Washers on the outside of the Mounting Rails, run the bolts through the Mounting Rails and Adjustable Band Guides, and secure with the 0.25" x 20 locknuts on the inside (C and B)
  • Insert the two (2) Heavy-Duty Adjustable Bands into the two (2) Adjustable Band Guides inside the Mounting Rails. The bands should curve outwards, away from the inside of the Mounting Rails. One (1) of these Heavy-Duty Adjustable Bands goes in each of the Adjustable Band Guides assembled inside each of the Mounting Rails (D)
  • Attach the two (2) assembled Pole-Mount Rails onto the two (2) Mounting Lips of the Enclosure using the four 0.37" x 16 Carriage Bolts entering through the inside of the Mounting Rail, use TWO (2) of the eight 0.37" EXTRA THICK Washers ON EACH bolt between the rail and the enclosure lip for proper spacing, then use the 0.37" Standard Washers on the outside of the Enclosure Lip with the 0.37" flang
  • Wrap the bands around the pole and use a power driver with a straight blade screw-driver, or a 0.37" socket fitting, to tighten the bands securely around the pole (F)

    • Renseignements généraux

    Nom:Mier BW-24PM8 Pole Mount for 24" Wide Enclosure, 8-10" Pole
    Category:Mier Products, Data Comm & Networking, Racks & Enclosures, Structured Wiring Enclosures
    UPC Code:
    Country of Origin:United States. Country of origin is subject to change.

    Spécifications

    Documents et ressources sur les produits

    Fiche de produit