Power Distribution Modules
Filter Results
Showing 1 - 28 of 76
content loaded
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Convenient On/Off Switch, Disconnects battery if voltage falls below 10VDC
- Works with most 12VDC control panels and power supplies
- Lifetime Limited Warratny
Sign In for Dealer Pricing
Sign In for Dealer Pricing
New
Key Features
- Dealer lockdown
- Two Factor Authentication
- Two-way PowerG communication with the control panel
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Fused or power limited versions
- Per zone voltage selection
- OutSmart Visual Voltage Verification
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Multiple outputs for direct lock control and additional accessory power distribution modules
- Color coded by function configuration jumpers for ease of programming
- Configurable fail-safe, fail-secure, and dry contact modes of operation
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Simple field selectable switch sets either 12 or 24VDC output
- FlexConnect system minimizes installation labor by using board buss structure to eliminate accessory board interwiring
- Configuration jumpers are colored by function for ease of programming
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Monitor health and status of host power supply, battery set, and up to twenty four individual outputs
- Auto-schedule, test, and report battery standby time
- Remote supervision of battery's state of charge
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Double Pole, Double Throw (DPDT, 2 Form C) Contact set
- Operating Voltage is 12/24VDC Auto sensing
- 8A Contact rating
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Tie Wrap or Panduit cable management
- Guarantees uniform installations across an enterprise
- Managed systems monitor power, batteries, and M8 outputs
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Form C contact
- U-shaped key supplied to reset the HUS-7A
- Status window indicator: RED (alarmed), BLUE (armed).
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Adds an economical secondary 12V output to any 24VDC system
- Provides the odd voltage required to power modems, routers and other IT or similar devices
- Snap-in style mounting standoffs with fast-on connect cables for easy field installation
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- The D8 power distribution module adds 8 auxiliary power outputs to a FlexPower power supply and is typically supplied as part of a system, or purchased as an expansion piece to an existing system. The D8 provides 8 auxiliary power outputs, each one individually protected by a fuse (D8) or solid state circuit breaker (D8P).
- FlexConnect dual buss architecture for field selectable buss 1 or buss 2 output
- Fire alarm interface (FAI) for egress lock control when used with an FPO power supply in single voltage applications
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Five (5) individual power-limited Class 2 outputs (auto-resettable)
- Filtered and electronically regulated outputs
- Thermal and short circuit protection with auto reset
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- 8 Output Power Distribution Module.
- Converts AC or DC power input (28V at 14A max.) into eight (8) fused power outputs.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Comprehensive output zone control
- Provides installer selectable output voltage, when used in a dual voltage system
- Visual Voltage Verification - Output LED changes color based on voltage setting (12V/Green, 24V/Blue)
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Voltage Range: 5V DC to 24V DC, up to 10A each or 16V AC to 28V AC, 60Hz, up to 10A each, 20A total input
- 15/32A Main Fuse Rating
- Fuse protected outputs rated at 3A per output, non power-limited. Total output 20A max
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- 8 Fuse Outputs for efficient power distribution
- 1A output per fuse for consistent performance
- Ideal for access control systems
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Wire harness for panel power, lock control, faults and tamper switch
- Handy to have by installers on the job
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Black, high grade steel enclosures with powdercoat finish matches other LifeSafety Power equipment
- Predrilled and tapped holes for access panel mounting
- Mounting hardware included
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Network power distribution module.
- Reports diagnostics via Email/SNMP notifications.
- Retrofits with most currently installed multi-output power supply/chargers.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Auto-Resetting (PTC) Overload Protection (NO FUSES to REPLACE).
- Master Power On/Off Switch.
- Visual LED Power Indicators on each Output.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Equipped with eight ECB outputs, allowing for the distribution of power to multiple devices or components such as cameras, sensors, and access control systems
- Each output is fused to protect connected devices from overcurrent and short circuits, minimizing the risk of damage and ensuring operational safety
- Capable of supplying up to 2A of current per output, providing sufficient power for aWide range of security devices and peripherals
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Powers Intuity WiFi to RFLC Bridge
- Supports Intuity WiFi to ZWave Bridge
- Compatible with Intuity Controller
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Converts a single DC Input into 4 or 8 Class 2 rated outputs for “C” denoted models
- Class 1 wiring is required for “F” denoted models
- 9-28 VDC Operation
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Fire Alarm Panel or Access Control System trigger inputs. [NO] or [NC] supervised trigger input and polarity reversal trigger input (4mA draw from FACP)
- 5-Individual power outputs (auto-resettable)
- Filtered and electronically regulated outputs
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- 8 Heavy duty Relays with individual Inputs and Status LED’s
- Each Relay Input can be Activated from Low Current Open Collector, Normally Closed or Normally Open Switch
- EOL End of Line Resistor Fire Interface Master Trigger de-energizes all Output Relays that are Enabled
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- 7V Low Power Disconnect Module
- Compact and efficient design
- Ideal for power management applications
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Power-over-Ethernet module
- Expansion Nodes
- Input Blades
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
























