ASSA ABLOY
Filter Results
Showing 757 - 784 of 1990
content loaded
Sign In for Dealer Pricing
4511W-35-202-628|R8-4511W3520
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
4300-3M-101-313|R8-433M10131
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
7140-440-628-00|R8-714044028
Sign In for Dealer Pricing
Sign In for Dealer Pricing
AQS2410-8C2|SN-AQ24108C2
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- SPDT 10 A contacts (DPDT available, see How to Order section)
- Large 2" diagonal flush button
- Momentary operation
Sign In for Dealer Pricing
Sign In for Dealer Pricing
4511W-35-202-628|R8-4511W3520
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Single gang stainless steelWall plate
- 2' blue square push button
- Labeled with ADA SYMBOL
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Perfect solution for storefront doors with Adams Rite hardware
- The Adams Rite 7401 can operate in either Fail Secure or Fail Safe modes easily and can run on 12 or 24 volts in DC or AC mode
- Two monitoring signal switches which sense whether latchbolt is in strike and whether strike jaw is blocked
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Clear Anodized Finish
- Aluminum construction
- Opens under 35lbs of pre-load
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Dual Coil Solenoid
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Strike plate mounting template provides the easiest install for out-swing doors
- LED Indicator shows the lock is secure, open, or has an incomplete bond
- Tamper Switch sends an alarm output if the cover is removed and is selectable to NO or NC
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Includes switchable green and red lenses
- Red LED on plate where applicable
- 3 Amp rated contacts
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Stainless steel construction
- Tamper resistant
- Static strength 1,500 lbs
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Satin Stainless Steel Finish
- Electrified Deadlatch Strike Surface Mount
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Auxiliary bolt
- Steel with corrosion-resistant plating
- Both flat and radius faceplates are supplied
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Faceplate, measures 1" x 6-7/8" (25.4 mm x 174.6 mm)
- Deadlocks latchbolt to prevent “loiding” or case-knife entry
- Cylinder backset, 7/8" (22.2 mm), 31/32" (24.6 mm), 1-1/8" (28.6 mm) or 1-1/2" (38.1 mm)
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Stainless steel construction
- Tamper resistant
- Static strength 2,500 lbs (fail secure)
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Black Finish
- Stainless Steel material
- Dimensions: 4-7/8" x 1-1/4"
Sign In for Dealer Pricing
Sign In for Dealer Pricing
4300-3M-101-313|R8-433M10131
Key Features
- Dark Bronze Anodized Finish
- Aluminum construction
- Field-selectable voltage operation to match power source of 12 or 24 VAC/VDC
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- All combinations of AQ power supplies and distribution boards are UL listed
- Dual voltage 12 or 24 VDC field selectable continuous output
- Up to 85% efficiency which results in decreased operating costs and lengthens the lifespan of electronics
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Steel with corrosion-resistant plating; Measures 7/8" x 5-13/16" x depth [22.2mm x 147.6mm x depth]; Depth varies by backset (see table on back of page); Screw-fastened tube spacer brackets allow for cleaner removal when tab mounting
- While bolt is held fully retracted, a reverse turn of the key retains the bolt, allowing the door to be free swinging
- Stainless steel; Deadlocks latch bolt to prevent "loiding" or case-knife entry
Sign In for Dealer Pricing
Sign In for Dealer Pricing
7140-440-628-00|R8-714044028
Key Features
- Clear Anodized Finish
- Aluminum construction
- Grade 1 strength
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Sustainability documentation
- Energy efficient, low power usage
- Automatic dualVage – no field adjustment required
Sign In for Dealer Pricing
Sign In for Dealer Pricing
AQS2410-8C2|SN-AQ24108C2
Key Features
- All combinations of AQ power supplies and distribution boards are UL listed
- Single voltage 24 VDC continuous output
- Up to 92% efficiency which results in decreased operating costs and lengthens the lifespan of electronics
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- 8 Power Limited Outputs with Auto-Resetting
- Circuit Breakers for model 8C1R
- Each Output is Individually Selectable to Turn On, Turn Off, or always ON when Triggered
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Case: Steel with corrosion-resistant plating. Measures 15/16" x 5-13/16" x depth [23.8 mm x 147.6 mm x depth]. Depth varies by backset.
- Strike: Pick from optional strikes. 4304 no-cutsurface mounted strike for easy retrofits. Specify 4901-01 mortised-flush versionWhen covering existing MS deadlock preparation or for new applications. 4901-02 strike is available with radius profiles for pairs of doors and with extended lips of center-hung or thick door applications.
- Auxiliary Bolt: All metal. Deadlocks latchbolt to prevent “loiding” or case-knife entry.FaceplateMeasures 1" x 6-7/8" [25.4 mm x 174.6 mm]. Both flat and radius faceplates are supplied. Flat faceplates can also be adjusted in the field for right or le' beveled edge doors.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Case: Steel with corrosion-resistant plating. Measures 15/16 x 5-13/16 x depth [23.8 mm x 147.6 mm x depth]. Depth varies by backset.
- Strike: Pick from optional strikes. 4304 no-cutsurface mounted strike for easy retrofits. Specify 4901-01 mortised-flush versionWhen covering existing MS deadlock preparation or for new applications. 4901-02 strike is available with radius profiles for pairs of doors and with extended lips of center-hung or thick door applications.
- Auxiliary Bolt: All metal. Deadlocks latchbolt to prevent “loiding” or case-knife entry.FaceplateMeasures 1 x 6-7/8 [25.4 mm x 174.6 mm]. Both flat and radius faceplates are supplied. Flat faceplates can also be adjusted in the field for right or le' beveled edge doors.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Black Anodized Finish
- Aluminum construction
- 12V DC Continuous or Intermittent voltage operation
Sign In for Dealer Pricing
Sign In for Dealer Pricing
























