Product Overview
The G.R.I. 200 series is referenced and produced as an industrial-grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch.
The 200 housing is extruded from a 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming or causing failure of the delicate reed switch. All mounting hardware including lead anchors is provided as well as a mounting bracket for the actuating magnet. A 1/4” masonry bit is required for lead anchor installation.
General Information
Name : GRI 230-36 200 Series Floor Mount Industrial Overhead Door Switch, 3ft Armored Cable, DPDT, M-250 Magnet, Aluminum , George Risk Industries
Category : Door Closers
UPC Code : 697625017393
Country of Origin : United States. Country of origin is subject to change.
Specifications
General Information
ADI Part Number : GI-23036
Brand Name : GRI
Connectivity Technology : wired
Manufacturer : George Risk Industries
Manufacturer Part Number : 230-36
Product Name : Industrial Overhead Door Switch Set
Product Series : 200
Product Type : Magnetic Contact
Technical Information
Contact Configuration : DPDT
Contact Form : CX2
Contact Resistance : 140000 Micro Ohm
Contact Resistance (Ohm) : 0.14
Mounting Type : Floor Mount
Power Consumption : 5 W
Recommended Use : Door
Standard Gap : 2.5"
Standard Gap (mm) : 63.5
Termination Style : Screw Terminal
Physical Characteristics
Application/Usage : Industrial
Product Material : Aluminum, Stainless Steel
Power Description
Input Current : 250 mA
Input Current (A) : 0.25
Input Voltage : 175V DC
Input Voltage (V DC) : 175
Power Consumption (W) : 5.000
Power Source : DC Adapter
Warranty
Limited Warranty : Lifetime
Miscellaneous
Certifications & Standards : <ul> <li>UL</li> <li>ULC</li> </ul>
Features : End of Line (EOL) Resistor
Package Contents : <ul> <li>Industrial Overhead Door Switch Set</li> <li>Mounting Hardware</li> <li>Mounting Bracket</li> </ul>
